10.
氮化硼潤滑噴劑耐超高溫，高溫情況下仍保持超越的潤滑性能，無毒，無污染，高環保，高化學惰性，摩擦系數極低，耐高壓，高電阻，抗熱震，抗腐蝕性，導熱性好。
Boron Nitride (BN) Lubricant Spray is high-temperature resistant. It remains excellent lubricating prosperities even under high temperatures. BN lubricant spray is non-toxic/polluting, eco-friendly and high-pressure resistant. It has high chemical inertness, low coefficient of friction, thermal shock/corrosion resistance, corrosion and good thermal conductivity.
一.產品特性 Key Feature
1.無毒無害，無污染，高環保，超高潤滑離型性能。
1. The product is non-toxic/polluting, eco-friendly with high performance in lubricating release.
2.操作性佳：特殊噴霧型配方，使用手工方式即可均勻噴涂。
2. Good operability: adopts special spray formulation that only manual spayed is in use.
3.耐高溫：100—900℃，絕佳的耐熱沖擊能力。
3. High-temperature resistant: 100-900 ℃, excellent thermal shock resistance.
4.干燥速度快：特殊的速干配方，干燥速度快，提高生產效率，降低成本。
4. Fast drying speed: adopts special quick-drying formula to increase
productivity and reduce costs.
二.使用方法 Instruction
1.噴涂前一定要清理干凈待噴物品，不得混有其它不同類型之物質，更不能有粉法塵和油污；
1. Before spraying, workpiece must be cleaned thoroughly and cannot be mixed with other types of materials, powder dust and oil;
2.噴涂前，要上下?lián)u動噴罐，搖晃均勻，并垂直按下噴嘴頂部；
2. Before spraying, please evenly shake cans up and down, and vertically press the nozzle;
3.距待噴物部位約30-40CM處噴涂，并持續搖晃噴罐瓶身，讓噴涂表面均勻覆蓋；
3. Spray from the workpiece about 30-40cm away and continuously shake the can, so as to achieve uniform spraying surface.
4.噴涂物厚度約為15-30μm，產品附著力極強，無需噴涂太厚；
4. Spray the thickness of about 15-30μm. Do not spray exceeding the recommended thickness as the product has strong adhesion.
5.干燥表面：于常溫約需要1-2分鐘，待完全干燥就可使用。
5. Drying surface: place at ambient temperature for about 1-2 minutes, until the surfaces are completely dried.
6.工作場所注意通風，嚴禁吸煙，操作人員必須培訓上崗，不得拿著產品對著人員噴射，不可利用利器劃破罐體，不可撞擊罐體。（劃破罐體或撞擊罐體有危險）。使用完后之空罐嚴禁再利用。
6. The workplace should be adequately ventilated. No smoking is allowed. Operator must obtain a qualified certificate before working. The product must not be held against the people and pierced by any tools. Please do not hit the cans because scratch or hitting may cause danger). Do not throw empty cans into fire after use.
三.應用范圍 Application
適用于高溫保護，高溫潤滑，高溫情況下脫模，離型，抗氧化，金屬焊接防焊涂布，金屬鑄造，鍛造，擠型工業，鋁水包及導流槽保護，真空鍍膜機保護劑，電絕緣涂層，高溫絕緣體熱電偶保護，高溫滾輪保護，擠壓設備保護，電絕緣體，玻璃工業，耐高溫抗氧化涂層，干式潤滑介面，耐腐蝕介面，高溫燒結坩堝冶具保護與不粘性，金屬零件潤滑，軸承等高溫高磨耗條件下使用。
氮化硼涂料（又稱：氮化硼耐高溫潤滑離型涂料）氮化硼涂料是采用優質氮化硼，加特殊配方生產而成，具有極好的潤滑性能以及高溫穩定性。即使是在超高的溫度下，氮化硼依然能保持其潤滑性和惰性。常應用于鑄造、沖壓、鍛造和粉末冶金等領域。在金屬熔融和金屬成形操作過程中，將氮化硼涂料噴涂在與熱的或熔融金屬接觸的模具表面上避免模具化學侵蝕、使脫模，離型更容易、模具/沖模有更長的使用壽命，并大大提高產品的表面潔度，縮短生產時間。
The product is suitable for surface protection, lubrication and mold release under high
temperature. It is also applicable for anti-oxidation, solder coated metal
welding, metal casting, forging, extrusion industry, aluminum water tank and
diversion protection, vacuum coating machine protective agent, electrically
insulating coating, insulation thermocouple protection/ wheel protection under high
temperature, extrusion equipment protection, electrical insulators, glass
industry, oxidation resistant coating under high temperature, dry lubrication
interface, interface corrosion, high-temperature sintering crucible protection
with the rule of protection and no viscosity, metal parts lubrication, bearings
through the process of high temperature and high wear conditions. BN coating
(also known as high temperature lubrication release coatings BN) are made of
high quality boron nitride, adopting a special formula production to achieve
excellent lubricating properties and stability under high temperature. Even at
extreme temperatures, BN is still able to maintain its lubricating properties
and inert. It is often used in casting, stamping, forging and powder
metallurgy, and other fields. During the process of metal melting and metal
forming operation, the BN coating sprayed on the mold surface in contact with
hot or molten metal can avoid mold surface from chemical attack, so as to
easier the release. The product makes the mold / die achieves a longer life
span, greatly improves the cleanliness of product surface and shortens the
manufacturing time.
四．注意事項
1. 本品易燃，使用時嚴禁煙火，存放于50℃以下陰涼處，空罐不得拋入火中。
1. This product is flammable and prohibited
to use under fireworks. Please stored in a cool place below 50 ℃. Empty cans must not be thrown into
the fire.
2.使用前應將工件表面上的銹跡、重度油污清洗干凈，以免影響后續的噴涂及防腐潤滑效果。
2. Before the use, rusts and oil grease on
the workpiece surface should be cleaned, so as not to affect the subsequent
anti-corrosion coating and lubrication.
3.若不慎濺入眼睛，可提起眼瞼，用流動清水或生理鹽水沖洗干凈。
3. If accidentally splashed into the eyes, please
rinse with running water or saline.
4.不可吞食本產品。若不慎吞食，勿催吐，保持休息狀態，及時進行醫護。
4. Do not swallow the product. If swallowed, do not induce vomiting. Please rest and immediately approach to hospital for medical treatment.
五．包裝貯存 Packing and Storage
1.包裝：500ml/罐，12罐/件，24罐/件 。
1.Packing: 500ml/cans, 12
cans/ suite, 24 cans/suite
2.貯存：貯存于陰涼、干燥通風處。
2. Storage: please stored in a cool and dry ventilated place.
- Previous：No
- Next：9. 2017-08-22 20:58:59