High temperature resistant molybdenum disulfide spray
- Brand CSHPON spray
- Model CS-102 500ml
耐高溫二硫化鉬潤滑噴劑是在快干二硫化鉬噴劑的基礎上，添加耐高溫組分，成膜速度快，而且耐高溫。形成的膜耐低溫-180℃，耐高溫500℃ ，間歇性可達 600℃，膜層耐磨，持久有效。連續潤滑操作使用時。當防卡劑使用。附著力優良，潤滑膜不易脫落，壽命長，效果好。具防塵及防污染之優點。最適合慢速滑動面。耐用性能好，可以減少噪音 。廣泛應用于機械、造船、鋼鐵、紡織、鍛造、五金、航空等諸多行業。其在發達國家已廣泛使用，目前正在被國內越來越多的生產企業使用。
High-temperature resistant molybdenum disulfide lubricant spray provides the properties of high-temperature components and faster film-forming film, based on molybdenum disulfide spray. The film is resistant to low temperature up to -180 ℃ and high temperature up to 500 ℃ with intermittent temperature up to 600 ℃. It is wear resistant, durable and effective. The product provides excellent adhesion, effectiveness and long life span when used in continuously lubricated operation or applied as anti-card agent. It also offers dust and pollution prevention. It is mostly suitable for slow sliding surface due to high durability and noise reduction. The lubricant spray can be widely used in machinery, shipbuilding, steel, textiles, forging, hardware, aviation and other industries. It has been broadly utilized in developed countries and currently being used by more and more domestic enterprises.
產品用途 Application
1.預組裝處理： 可以在裝配時提供保護。使用噴劑時，將會在所裝配零件表面形成超薄潤滑涂層，不會改變零件的配合公差。二硫化鉬微粒的平均粒徑僅為0.5微米。如：開放式齒輪、機械的組裝、模具組裝/發電所的感應槽、蒸汽發電機等。
1. Pre-assembly process: the lubricant can provide
protection during assembly. When using spray cans, the product will form a thin
lubricating coating on the surface of the assembled parts with no change in fit
tolerance. The average particle size of molybdenum disulfide is only 0.5 micron
meters. The lubricant is suitable in open gears, mechanical assembly, mold
assembly / power generation induction groove, steam generators and so on.
2.保護薄膜： 可以作預先潤滑，即取即用。適用于裝配機件及內部潤滑，潤滑鏈條、鋼纜、螺絲、輸送帶、拉纜機、金屬鑄造機、墊圈外膜、一般機器的維修和保養，高溫操作儀器，橡膠脫模，玻璃加工等.
2. Protection film: product can be used for pre-lubrication
and immediate use. It is applicable for internal lubrication of assembly parts
and other lubrications for chains, wire ropes, screws, conveyor belt, pulled-cable
machines, metal casting machine, washer outer membrane, general machinery
repair and maintenance, high-temperature operating instrument, rubber stripping,
glass processing and so on.
3.高溫潤滑劑： 在-180℃至500℃可以形成穩定的潤滑膜。二硫化鉬在高溫達到500℃（在氣壓降低的情況下甚至更高）時仍然可以干式潤滑，盡管樹脂在這樣的溫度下會遇熱熔化。適用于煉鋼、紡織機械維修業。干性潤滑劑在鋼鐵工業中作為高溫潤滑劑被廣泛應用。
3. High-temperature lubricant: the product can
form a stable lubricating film between -180 ℃ and 500 ℃. Molybdenum disulfide is able to perform
dry lubrication even at high temperature up to 500 ℃ (even higher temperature in the case of a reduction in
pressure), although the resin at such temperature will encounter melting. The
product is suitable for steel and textile machinery repair industry. The
product in the steel industry has been widely used as a high-temperature
lubricant.
4.潤滑性效能： 避免了常規濕式潤滑劑在應用時出現的問題，在灰塵過多的情況下可以提供干性潤滑。用于紡織印染機械最為理想，使用于各類滑動導桿、轉動導桿。如：自動絡筒機、熱定型機螺桿、拉幅定型機、染色機、蒸化機、烘燥機、紡絲機、印花機、絲光機、筒子機、細紗機、梳棉機、清花機、印染機、烘干機、定型機調幅螺桿等以及軸承的潤滑。本產品可用于接觸面的潤滑以及礦業中粗吊鈎的潤滑和防銹保護。
4. Lubrication Efficiency: the product has avoided the problems when conventional wet lubricants are used in application, where dry lubricants provide better solution in the case of excessive dust.
The product is mostly Ideal for textile machinery or used in all kinds of rotating/sliding-guide rod. For example, automatic winder, heat setting screw, stenter, dyeing machine, steamer, drying/spinning/printing machines, mercerizer, bobbin machine, carding, scutching
machine, screws of AM setting machine, bearings and so
on. This product can be used for
lubrication among contact surfaces and rust protection and lubrication of contact surfaces in rough mining hooks.
5.切割工具： 用于切割刀具，可以得到最佳效益。刀具表面缺痕中所嵌二硫化鉬將使切割機切割時的效果發揮到最大。
5. Cutting Tools: the product applied to the cutting tool
has shown a better effectiveness. Molybdenum disulfide applied on the marks of
surface of cutting machines maximize the working efficiency.
6.塑料表層： 噴涂于塑料表面更能突現產品優點，如尼龍軸承。
6. Plastic Surface: the product sprayed on the plastic
surface has shown a more emergent advantage in applications such as in nylon
bearings.
7. 噴涂用于高負荷下的軸承、滑軌、導軌、花鍵、導槽、絲桿的安裝和磨合潤滑。
7. Applicable for installations and running
lubrications of high load bearings, sliders, rails, splines, guide
grooves and screws.
8. 噴涂用于沖壓加工的滑塊﹑彎曲﹑沖孔﹑沖壓﹑沖模的潤滑。
8. Applicable for lubrication of stamping
sliders, bending, punching, pressing and dies.
9.噴涂用于軸心/杯套、軸銷/孔花的裝配潤滑。
9.Applicable for assembling lubrications
of axial / cup
sets, axle pin / holes.
10.噴涂用于用于極壓環境下的螺紋、軸套、緊固件、密封件、閥門和其他管道系統、履帶、皮帶輪、齒輪等的裝配潤滑，防止配合部件卡死、燒結。
10. Applicable for assembling lubrications
of threads, bushings, fasteners,
seals, valves and other piping systems, tracks, pulleys
and gears under extreme pressure environment, preventing mating components from
stuck and sintering.
11.噴涂用于用于新機器的磨合及輕微運動或間竭性運動零件的永久性潤滑。
11. Applicable for run-in of new equipments and permanent lubrications of minor-movement or intermittent movement machines.
主要性能 Key Feature
1.具有良好的熱穩定性、抗極壓性、防銹性能和潤滑性能，粘附性強。
1. Good thermal stability, resistance to extreme pressure,
anti-rust/lubricating properties and strong adhesion.
2.本品吸附于金屬表面上，形成緊密的保護膜和潤滑膜，起到良好的保護和潤滑作用。
2. The product adsorbed on the metal surface will form a
tight protective lubricant film, achieving
good protection and lubrication.
3.有較寬的溫度適應空間，最佳耐溫區間-80℃——350℃，間歇耐低溫-180℃、耐高溫450℃。
3. There are wide temperature adaptation space. The
optimum temperature range is between -80 ℃ --350 ℃ with intermittent low temperature at -180 ℃ and intermittent high temperature at 450 ℃.
4.產品技術成熟、質量穩定、性價比好、攜帶方便，使用簡單。
4. The product is cost effective and easy to transport/use with mature technology and stable quality.
使用方法 Instruction
1.使用前，先將工件表面進行徹底的清潔除油處理。
1. Before use, first thoroughly clean the surface degreasing.
2.然后將罐體用力搖勻約30秒，使罐液充分攪拌，以利于噴霧均勻。
2. The can is then forced to shake for about 30 seconds,
so that the tank was well stirred in order to facilitate a uniform spray.
3.噴涂時，距離工件約20厘米左右移動噴涂，勿固定在一個位置噴涂。
3. Spray from about 20 cm to move around the workpiece
and do not spray in one fixed position.
4.使用后，倒轉罐身噴射約5秒，作用為清洗噴咀，以防塞咀。
4. After use, invert cans upside down for about five
seconds. The role is to clean nozzles to prevent clogging.
5.使用本品時應詳細閱讀產品使用說明書，并在專業人員指導下進行使用。
5. Users should carefully read the product manual and use under guidance of the professionals.
注意事項 Precautions
1. 本品易燃，使用時嚴禁煙火，存放于50℃以下陰涼處，空罐不得拋入火中。
1. This product is flammable and prohibited to use under fireworks.
Please stored in a cool place below 50 ℃. Empty cans must not be thrown into the fire.
2.使用前應將工件表面上的銹跡、重度油污清洗干凈，以免影響后續的噴涂及防腐潤滑效果。
2. Before the use, rusts and oil grease on the workpiece
surface should be cleaned, so as not to affect the subsequent anti-corrosion coating
and lubrication.
3.若不慎濺入眼睛，可提起眼瞼，用流動清水或生理鹽水沖洗干凈。
3. If accidentally splashed into the eyes, please rinse with
running water or saline.
4.不可吞食本產品。若不慎吞食，勿催吐，保持休息狀態，及時進行醫護。
4. Do not swallow the product. If swallowed, do not induce vomiting. Please rest and immediately approach to hospital for medical treatment.
包裝貯存 Packing and Storage
1.包裝：500ml/罐，12罐/件，24罐/件 。
1. Packing: 500ml/cans, 12 cans/suite, 24
cans/suite
2.貯存：貯存于陰涼、干燥通風處。
2. Storage: please stored in a cool and dry ventilated place.
